Environmental Information - Sharp MX-M266N Startanleitung

Supplies
Standard supplies for this product that can replaced by the user include paper
and toner cartridges.
Be sure to use only SHARP-specified products for the toner cartridges and
transparency film.
For best copying results, be sure to use only
Sharp Genuine Supplies which are designed,
engineered, and tested to maximize the life
and performance of Sharp products. Look
for the Genuine Supplies label on the toner
package.
GENUINE SUPPLIES
Storage of supplies
Proper storage
1. Store the supplies in a location that is:
• clean and dry,
• at a stable temperature,
• not exposed to direct sunlight.
2. Store paper in the wrapper and lying flat.
3. Paper stored in packages standing up or out of the wrapper may curl or
become damp, resulting in paper misfeeds.
Storing toner cartridges
Store a new toner cartridge box horizontally with the top side up. Do not store
a toner cartridge standing on end. If stored standing on end, the toner may not
distribute well even after shaking the cartridge vigorously, and will remain inside
the cartridge without flowing out.
• Store the toner in a location that is cooler than 40°C (104°F). Storage in a hot
location may cause the toner in the cartridge to solidify.
• Please use SHARP-recommended toner cartridges. If toner cartridges other
than SHARP-recommended toner cartridges are used, the machine may
not attain full quality and performance and there is a risk of damage to the
machine.
Supply of spare parts and consumables
The supply of spare parts for repair of the machine is guaranteed for at least
7 years following the termination of production. Spare parts are those parts of
the machine which may break down within the scope of the ordinary use of the
product, whereas those parts which normally exceed the life of the product are
not to be considered as spare parts. Consumables too, are available for 7 years
following the termination of production.
Information on Disposal
Information on the Disposal
of this Equipment and its
Batteries
IF YOU WISH TO DISPOSE OF THIS EQUIPMENT, DO
NOT USE THE ORDINARY WASTE BIN, AND DO NOT
PUT THEM INTO A FIREPLACE!
Used electrical and electronic equipment and
batteries should always be collected and treated
SEPARATELY in accordance with local law.
Separate collection promotes an environment-
friendly treatment, recycling of materials, and
minimizing final disposal of waste. IMPROPER
DISPOSAL can be harmful to human health and the
environment due to certain substances! Take USED
EQUIPMENT to a local, usually municipal, collection
facility, where available.
This equipment contains a BATTERY which cannot be removed by the user.
For battery exchange, please contact your dealer.
If in doubt about disposal, contact your local authorities or dealer and ask for
the correct method of disposal.
ONLY FOR USERS IN THE EUROPEAN UNION, AND SOME OTHER
COUNTRIES; FOR INSTANCE NORWAY AND SWITZERLAND: Your
participation in separate collection is requested by law.
The symbol shown above appears on electrical and electronic equipment (or
the packaging) to remind the users of this.
If the equipment has been used for BUSINESS PURPOSES, please contact
your SHARP dealer who will inform you about take-back. You might be charged
for the costs arising from take-back. Small equipment (and small quantities)
might be taken back by your local collection facility. For Spain: Please contact
the established collection system or your local authority for take-back of your
used products.
Please read this part carefully. It will help you to reduce your impact on the
environment and help you to reduce your costs at the same time.
Saving paper
1. The automated duplex printing function is for printing both sides of paper
2. By printing on recycled paper and thin 64g/m
Saving energy
1. This machine has an energy save mode for reducing power consumption
2. This machine complies with the latest version of the International Energy Star
Cartridge disposal and treatment
Regarding your used Sharp toner cartridges and other consumables from
Sharp copiers/multifunctional machines, please observe that these waste
products shall be treated properly according to the legal requirements in your
area. We recommend to contact competent service providers (e.g. waste
recycling companies) for this, and to ask local authorities for support, when
necessary. For information on existing Sharp collection and recycling programs,
which exist in some countries, please see our website www.sharp.eu.
The instructions for this manual are separated in the following three sections.
Before using the machine
Start Guide: this manual
This section explains precautions to ensure safe usage. This section also
includes important information for persons that are responsible for the
maintenance of this machine.
Read this section before using the machine for the first time.
Printing and faxing from a computer
Software Setup Guide (PDF)
This section explains how to install the various drivers needed when using this
machine as a printer, network scanner, or fax machine.
Read this section when using this machine from a computer.
Directions for use
Users from PRIVATE
HOUSEHOLDS are
Operation Guide (PDF)
requested to use
existing return facilities
Information on the copier, fax, and other various functions that this machine
for used equipment.
provides have been compiled into a PDF file called [Operation Guide].
Return is free of charge.
Read the Operation Guide to learn how to use this machine, when you want to
know more about its functions, or when you have trouble operating it.
How to read the Operation Guide
The Operation Guide on the accessory CD-ROM provides detailed instructions
for operating the machine. The Operation Guide is provided in PDF format.
Insert the supplied CD-ROM into your CD-ROM drive.
Double-click the CD-ROM icon or display the contents of the CD-ROM and
double-click "index.pdf".
4

Environmental information

automatically without turning over the paper manually. If the machine is
equipped with the automated duplex printing function, set up your print
settings on your computer to automatically print double-sided. Please use the
automatic duplex printing function of this machine wherever possible.
EN12281:2002 and similar quality standards ,you can reduce the impact on
the environment.
largely. When the machine is not used for a certain period of time, the
machine switches to this less power-consuming mode. In this mode, the
power supplies of the operation panel and fusing unit are shut off. Thus
the power consumption can be reduced. The recovery time from this mode
requires more time than from the "ready mode". You can adjust the times the
machine switches to the energy save mode. For models with a power-save
button: If your next print would be later than the set time for the energy save
mode, we recommend to press the power-save button to activate the power
saving at once. For models with automated power management function
that adjusts itself to the usage pattern of the device, or also for models with
eco scan mode, we recommend the use of it in order to reduce the energy
consumption and save additional costs. These energy-saving functions are
described in detail in the operation manual.
criteria. The "International Energy Star Programme" is a voluntary registration
scheme for energy-saving office devices.
Operation manuals
To view the manual in PDF format, Acrobat Reader or Adobe Reader of Adobe
Systems Incorporated is required. If neither program is installed on your
computer, the programs can be downloaded from the following URL:
http://www.adobe.com/
paper that meet the standard
2