Independence Innovation Pro Betriebsanleitung Seite 13

2.2. Mouting the inner container into the harness:
1. Connect the rescue bridle with the harness bridle by
looping the bridles or with a quick link (strength > 2400
daN) and fix the connection to prevent slipping (for
example by a neopren sleeve).
a)
3. Close the harness container with the help of 3 packing
cords (a,b,c). Place the handle/container connection in
between b) and c). Put the 3 packing cords through the
grommets of the elastic strap (I).
a)
II)
5. Close container flap (III) with packing cords b) and c).
Put the pins through the loops.
c)
b)
I)
b)
c)
III)
2. Stow the bridle in the harness container and place
the innercontainer in the harness container. (Lines of
innercontainer are facing to the bottom side)
a)
4. Close container flap (II) with packing cords a) and b).
6. Remove all packing cords! Secure the pin in the middle
with a 2 daN seal threat, finally close the pin covers.
c)
b)
II)