Conrad EKM 265 Bedienungsanleitung Seite 6

Exit the programming mode
To leave the programming mode and to store the tariffs, press
the key ,,MODE" . You will return to normal mode.
After a calculation time of approx. 2 seconds, the subdisplay will
show the costs per hour based on the preset tariff.
B 3.2 Operation Modes
The EKM 265 tan be operated in the following 2 modes:
1. Normal Mode
In the normal mode the keys ,,STA/STP" and ,,ON TIME" are
without function. The main display Shows the present power
input of the connected unit. The subdisplay Shows the costs
(see B.l tariff input).
Display: example
i.e. the tost for one hour amount to approx. 44.2 Pf (0.442 DM)
To switch to the next tariff only press the key ,,MODE" and hold
it down until the other tariff is displayed. As soon-as you release
the key, the costs based,on the second tariff are calculated and
displayed.
10
2. Record Mode
To Change from normal mode to the record mode, press the key
,,MODE" for a short time.
Display:
To Start recording press the key ,,STA/STP" ; during recording the
With the ,,MODE" key, you have the possibility to call up 5 diffe-
rent readings one after the other:
,
Display:
Display:
11