Inhaltsverzeichnis
Werbung
● If the clock still has not set itself after 12 minutes, reception is faulty or not possible at the chosen
location. Repeat setting at a different location by pressing the RESET button (A4).
ALARM FUNCTIONS
SET ALARM TIME
● Turn the set-alarm knob (A3) in the direction of the arrow in order to set the alarm time. Never turn the
set-alarm knob in the opposite direction since this could damage the works.
SWITCH ON ALARM
●
Push the alarm ON/OFF switch (A8) upwards. The red dot is displayed on the dial near the 3 O'clock
position. At the set alarm time, the alarm sounds for maximum 2 minutes if the alarm ON/OFF switch (A8) is
still upwards (i.e. at the ON position) or the top (A2) button is not pressed.
INTERRUPT ALARM (SNOOZE)
●
Press the snooze button on the top (A2) of the alarm clock, the light turns on for 3 seconds. The alarm
stops for 5 minutes and then sounds again.
SWITCH OFF ALARM
●
When the alarm is activated, push the alarm ON/OFF switch (A8) downwards, the green dot is displayed
on the dial near the 3 O'clock position and the alarm stops.
ILLUMINATION
●
To be able to read the face of your alarm clock even when it is dark, briefly press the button (A2) on the
top of the alarm clock. The illumination function is activated for 3 seconds.
TO SET THE TIME MANUALLY
●
Press and hold the M.SET (A5) button for 3 seconds to set the time:
●
Press the M.SET button (A5) for 1 second to advance 1 minute
●
Press the M.SET button (A5) for more than 1 second to auto advance the minute hand.
●
If the M.SET button (A5) is not pressed for 8 seconds, the clock is set.
RECEIVING THE RADIO CONTROL SIGNAL
The radio-controlled clock will automatically receive the radio signal 12 times every day. It will take 3-12
minutes to receive the radio signal.
During force DCF reception by pressing the REC button (A6) for 3 seconds, the clock will go to 12 O'clock
and start receiving the radio signal for 3-12 minutes. Once it has received the DCF signal and processed it
`accordingly, the clock automatically displays the correct time. If the clock still has not set itself after 12
minutes, reception is faulty and it will resume the time before the force reception. This item complies with
all the required European standards.
11
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
