Epson IR-320 Bedienungsanleitung Seite 27

Changing the AC Outlet Circuit Fuse
An overcurrent from the AC outlet can blow the fuse. Follow the steps
below to replace it.
1. Turn off the equipment connected to the AC outlet and unplug the
power cable from the AC outlet.
2. Turn off the IR-320 and unplug the power cable from the AC inlet.
3. Using a flathead screwdriver, push and twist the fuse holder to
remove it, as shown in illustration Z.
4. Replace the old fuse with an new one and replace the fuse holder.
IR-320 User's Manual 15
English