Speaker Volume Adjustment - Epson IR-320 Bedienungsanleitung

English
Paper Feed with a Printer
If a printer is connected to the IR-320, press the paper feed button to
feed paper, as shown in illustration S.
LCD Brightness Adjustment
You can adjust LCD brightness by using the controls marked A and B
in illustrations T and U.
LCD/Keyboard Angle Adjustment
The angle of the LCD/keyboard unit is adjustable, but the adjusting
positions differ depending on the LCD unit. Follow these steps to
change the angle.
DM-LR121series LCD unit
1. Adjust the angle of the LCD unit while pressing the lock lever on
the left side of the LCD unit, as shown in illustration V.
2. When you release the lock lever, the angle is fixed.
3. Move the LCD unit slightly up and down to firmly fix it.
DM-LR104 series LCD unit and DM-KR084 Keyboard
1. Slide the LCD/keyboard unit lock switch to the unlock position,
as shown in illustration W.
2. Adjust the angle to the position you want.
3. Set the lock switch to the lock position again.

Speaker Volume Adjustment

Adjust speaker volume by following the procedure below.
1. Open the front panel. If the front panel is locked, unlock the front
panel using the front key.
2. Turn the volume control to the left to turn down the volume. Turn
it to the right to turn up the volume. (See illustration X.)
How to Read a Magnetic Stripe Card
When you attach an MSR (Magnetic Stripe Reader) unit, magnetic
stripe cards can be read.
Hold the card as shown in illustration Y, and pass it through the MSR
unit.
14 IR-320 User's Manual