Herunterladen Inhalt Inhalt Diese Seite drucken

Epson IR-320 Bedienungsanleitung Seite 20

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 29
English
Re-setting the BIOS
If the built-in battery is replaced, the settings of the real-time clock and
the CMOS will be lost. In this case, follow the procedures below to set
the BIOS again.
1. Connect an external keyboard to the keyboard/mouse connector
of the IR-320.
2. Turn on the IR-320.
3. While the following message is displayed, press the Del key.
4. The BIOS setup utility is started. You need to do the following
three actions for the BIOS setup utility:
Load the setup default.
Set the Date/Time.
Set the battery unit (OI-R03).
5. Load the setup default (already adjusted in advance so that the
IR-320 can operate at its best).
Select "Load Optimized Defaults" with the cursor key; then
press the Enter key.
When "Load Optimized Defaults (Y/N)?" is displayed, press
the Y key; then the Enter key. The setup default is loaded.
Press the Esc key to return to the main menu.
6. Set the Date/Time.
Select "Standard CMOS Features" with the cursor key; then
press the Enter key.
Select the item of "Date/Time" with the cursor and change the
setting with the PageUp key and PageDown key.
When the setting is complete, press the Esc key to return to the
main menu.
7. Set up the battery unit. If it is not installed, you do not need to do
the following:
Select "Power Management Setup" with the cursor; then press
the Enter key.
Select "System Battery" with the cursor key.
Change the setting to "Equipped" with the PageUp key.
When the setting is complete, press the Esc key to return to the
main menu.
8 IR-320 User's Manual
Press DEL to enter SETUP.

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für Epson IR-320

Diese Anleitung auch für:

Dm-lr104 seriesDm-lr121 series

Inhaltsverzeichnis