Operation - BASETech 10400 mAh Bedienungsanleitung

Operating instructions
Powerbank, 10400 mAh
Item no. 1382130
Intended use
This product is a portable charging device and is designed to charge batteries in mobile devices
such as smartphones. The built-in internal battery is charged via USB.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you
use the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuiting, fire, electric shock etc.
Read the instructions carefully and keep them. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Powerbank
• Micro USB cable (approx. 24 cm long)
• Operating instructions
Explanation of symbols
This symbol indicates a health hazard, e.g. electric shock.
The exclamation mark indicates specific risks associated with handling, function and
use.
The "arrow" symbol indicates special tips and operating information.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• Never leave the product unattended during use.
• Never use the product immediately after it has been brought from a cold room into
a warm one. The condensation generated could destroy the product. Allow the
product to reach room temperature before connecting it to the power supply and
putting it to use. This may take several hours.
• Attention, LED light: Do not look directly into the LED light! Do not look into the
beam directly or with optical instruments!
• The powerbank's housing will warm up during use. Ensure that there is sufficient
ventilation; never cover the product!
• Make sure that the cable connected to the powerbank is not pinched, kinked or
damaged by sharp edges.
• Do not use any force when connecting USB plugs. A USB plug can only be
inserted into the USB port in one orientation.
Version 10/15
• Do not use or store the product in surroundings with a strong static electrical
charge or strong magnetic fields.
• Before charging the internal battery, ensure that the USB power source can
deliver a sufficient charging current, otherwise you may damage the product. Do
not use a USB port on a computer, keyboard or USB hub to charge the internal
battery, as the current supplied by these ports is not sufficient.
• The rechargeable battery is permanently built into the product and cannot be
replaced.
• Never damage the rechargeable battery. Damaging the casing of the rechargeable
battery might cause an explosion or a fire!
• Never short-circuit the contacts of the rechargeable battery. Do not throw the
battery or the product into fire. There is a danger of fire and explosion!
• Charge the rechargeable battery regularly, even if you are not using the product.
The rechargeable battery technology used in the product does not require you to
discharge the rechargeable battery first.
• Never charge the rechargeable battery of the product unattended.
• When charging, place the product on a surface that is not heat-sensitive. It is
normal that a certain amount of heat is generated during charging.
• Consult an expert when in doubt about the operation, safety or connection of the
device.
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Operating elements
1 IN 5V micro USB port (charging input)
2 Battery level indicator
3 LED light

Operation

Before charging the internal battery, ensure that the USB power source
can deliver a sufficient charging current, otherwise you may damage the
product. Do not use a USB port on a computer, keyboard or USB hub to
charge the internal battery, as the current supplied by these ports is not
sufficient.
Always read the operating instructions for your mobile device before connecting
it to the powerbank.
Do not short circuit the charging inputs/outputs on the powerbank.
The USB cable is not designed for data transfer.
Fully charge the powerbank for approx. 17 to 18 hours before using it for the first
time.
It is not possible to charge the internal battery and a mobile device at the same
time. Use the charging input (1) or output (4 or 6), but do not use both at the same
time.
If you are not going to use the powerbank for a prolonged period, fully charge the
internal battery every three months to maintain maximum performance.
1 2
OUT 1
4 5
4 OUT 1 USB-A port (charging output 1)
5 Power button
6 OUT 2 USB-A port (charging output 2)
3
OUT 2
6