Connecting Diagram Fire Alarm System - RWA TRZ Plus DG Bedienungsanleitung

SHE control panel TRZ Plus DG

Connecting diagram Fire Alarm System

All work to be carried out without mains supply (230 V AC) or any batteries connected. Route the connecting cables into
the control panel housing at the top. Connect all connecting cables according to the wiring diagram and make sure that
they are correctly connected. Incorrect connections or fi gure or colour mix-ups can lead to incorrect function of the
control panel or of the external components. The notes and installation directives in the technical documentation are
always to be observed.
without fi re alarm system
active end module
FAS: Fire Alarm System
* Impulse contact, not for "FAS Open" and "Reset by closer contact", switch DIP-Switch 4 to ON.
*active end module
(not included in delivery) is only required when the
DIP-Switch 11 is switched ON.
Installation is polarity independent.
Monitoring resistor
34
with fi re alarm system
FAS
with fi re alarm system and
smoke detectors
FAS
SSD 521
UTD 521
UTD 523
MSD 523
04/24999499