Led Indication; Technical Data - Honeywell mifare-Leser "Accentic" Anleitung

Mounting and Connection Instructions mifare/DESFire EV1 reader "Accentic" with/without keypad
8.

LED indication

The LEDs will be driven by the connected controller. Depending on the
green
connected controller the functions are fixed or can be defined via the
programming.
Special case: the LED below flashes red and green alternating.
yellow
This means a system error. In this case you should contact our support.
red/green
9.

Technical data

Rated operating voltage
Operating voltage range
Current consumption in stand by mode <30 mA (on average)
Time-limited write/read mode
(Time lag after last data carrier reactivation 5 sec.)
Luminous background
Mounting surface
Reading distance
- mifare readers
- mifare DESFire EV1 readers
Interface range:
- RS-485
- Clock/Data
Connecting cable
Protection category as per
Environmental class as per VdS
Operating temperature range
Housing dimensions (W x H x D)
Colour
1)
The denoted reading distance can only be garanteed by using data carriers provided by our
company.
The following readers
- mifare reader "Accentic" with keypad Item no. 026423
- mifare reader "Accentic" without keypad Item no. 026422
- mifare DESFire EV1 reader "Accentic" with keypad Item no. 026436.10
- mifare DESFire EV1 reader "Accentic" without keypad Item no. 026435.10
comply with the essential requirements of the R&TTE 1999/5/EC Directive, if used for
its intended use.
The EC-Declaration of Conformity can be downloaded from our homepage (Service / Download).
info.security.de@honeywell.com
1)
EN 60529
12 V / 24 V DC
9 V to 30 V DC
<55 mA (incl. status indication)
<4 mA (time-limited for 5 sec. max. 8 mA)
Brightness settable
Any surface, also metal
>4 cm up to 8 cm, depending on data carrier typ
and mounting site- /surroundings Interfaces
aprox. 1.5 cm (only cards)
up to 1200 m
up to 200 m
12-core (5-core DESFire EV1 reader), shielded, length 6 m
IP 65
III
-25 °C to +55 °C
75 x 142 x 32 mm
White aluminium (similar to RAL 9006)
29