Herunterladen Inhalt Inhalt Diese Seite drucken

Application; Interfaces - Honeywell mifare-Leser "Accentic" Anleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Mounting and Connection Instructions mifare/DESFire EV1 reader "Accentic" with/without keypad
1.

Application

The mifare-readers "Accentic" and mifare DESFire EV1 readers "Accentic" are used in intrusion
detection systems and access control systems as reading units and operating units.
The mifare readers features different interfaces (see Chapter 2.) offering a wide spectrum of
applications.
Performance features
-
Clear and logical operating concept.
-
Simple start-up.
-
Simple RS-485 address allocation, manual or automatic.
-
The reader is completely protected against humidity.
-
For use outdoors and indoors at temperatures from -25 °C to +55 °C.
-
Simple assembly with two or three screws.
-
The reader can be directly mounted on commercially available f.m. sockets (DIN).
-
The front of the housing is replaceable (in different colours).
Special reader features:
-
New evaluation process ensures extremely stable transmission.
-
By use of DESFire EV1 readers extreme safety is available because of the encoding procedure
AES (Advanced Encryption Standard). See chapter 3.2.
-
Synchronization of max. 4 readers installed close to one another.
-
Low current consumption
Special keypad features:
-
Neutral labelling of LEDs and keypad.
-
Abrasion-resistant 10 key keypad with 6 additional functional keys.
-
Tactile and acoustical acknowledgement.
-
Night design with time-limited luminous background.
2.

Interfaces

mifare readers (026422 und 026423):
RS-485:
Bidirectional interface with "Modulbus" protocol
Suitable for ACS-8, IK3 Evaluation unit and Door controller module for MB
Interface range up to 1200 m
Clock/Data:
Unidirectional interface
TTL-level, 4 bit code according to DIN 9785, active = LOW
Data protocol ACS-8, ACS-2 plus, ACT
Interface range up to 200 m
Wiegand instead of Clock/Data:
Special type on request
mifare DESFire EV1 readers (026435.10 und 026436.10):
RS-485:
Bidirectional interface with "Modulbus" protocol
Suitable for ACS-8, IK3 Evaluation unit BUS-2 and Door controller module for MB
Interface range up to 1200 m
19

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis