Control Of The Aiv Dvd 190861 With Porsche Pcm2.1; Twin Operation Of The Aiv Dvb-T 190860 And Aiv Dvd 190861 With Porsche Pcm2.1; Service Notes - IMU 670848 Bedienungsanleitung

28

Control of the AIV DVD 190861 with PORSCHE PCM2.1

Operation:
1. ON/OFF („POWER")
2. Source / AV („SRC")
3. „Display"
E E
4. „<<" Search -
5. „>" Play / Pause
N N
6. „>>" Search +
G G
7. „Title"
L L
8. „Menu PBC"
I I
9. „ZOOM"
S S
10. Stop
11. „|<<" Track - This feature can also be controlled with the steering wheel controls. *
H H
12. „>>|" Track + This feature can also be controlled with the steering wheel controls. *
* Due to the PCMs' technical design, the functions for channel+/- are interchanged. Consequently the button for
channel + is "<" and channel – is ">".
Twin operation of the AIV DVB-T 190860 and AIV DVD 190861 with
PORSCHE PCM2.1
After the first system start up, the DVB-T mode is active.
If only the AIV DVD 190861 is intended to be controlled, a simple adjustment to channel 99 with an afterwards
confirmation is enough to switch to "DVD" mode. The selected mode persists also after switching off and on
ignition, and is displayed in the audio menu of the instrument cluster. For the twin operation mode the cable kit
670864 is needed additionally.
When operating and controlling the AIV DVB-T 190860 and the AIV DVD 190861 at the same time, the
switching function (channel 99) can be stored on station button "9" for a more comfortable use. With this event
the functions normally assigned with "9" will be lost. This is the "Exit" function from 190860 and "Zoom" function
from 190861. While the "Zoom" function is not absolutely necessary, the "exit" function can also be neglected,
as you can get out of all callable menus with the button you previously called them.

Service notes

This unit does not need any servicing.
Do not open the housing. There are no user-serviceable parts inside.
Wipe gently with a dry cloth over the surface to clean the unit. If there is more tough dirt, first use a light wet
cloth and then use a dry one. Never use corrosive cleaners to clean the unit.
A·I·V GmbH + Co. KG ● Tatschenweg 1 ● 74078 Heilbronn