What To Do If; Disposal; Packaging Material - Zanussi ZKF641F Gebrauchsanweisung

What to do if ...

Problem
The cooking zones are not func-
tioning.
The residual heat indicator is not
displaying anything
If you are unable to remedy the problem by fol-
lowing the above suggestions, please contact
your dealer or the Customer Care Department.
1
Warning! Repairs to the appliance are only to
be carried out by qualified service engineers.
Considerable danger to the user may result
from improper repairs.
3
If the appliance has been wrongly operated,
the visit from the customer service technician
or dealer may not take place free of charge,
even during the warranty period.

Disposal

2

Packaging material

The packaging materials are environmentally
friendly and can be recycled. The plastic com-
ponents are identified by markings, e.g. >PE<,
>PS<, etc. Please dispose of the packaging
materials in the appropriate container at the
community waste disposal facilities.
2
Old appliance
W
The symbol
aging indicates that this product may not be
treated as household waste. Instead it shall be
handed over to the applicable collection point
for the recycling of electrical and electronic
equipment. By ensuring this product is dis-
posed of correctly, you will help prevent po-
tential negative
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. For more detailed in-
formation about recycling of this product,
please contact your local city office, your
household waste disposal service or the shop
where you purchased the product.
22
The desired heat setting is not set.
The fuse in the house's electrical
wiring (fuse box) has been tripped.
The cooking zone was only on for a
short time and is therefore not hot
on the product or on its pack-
consequences for
Possible cause
the
Remedy
Set the heat setting.
Check the fuse.
If the fuses trip a number of times,
please call an authorised electri-
cian.
If the cooking zone is supposed to
be hot, call the Customer Service
Department.