E) Monitor Arm Band; F) Connection To A Pc; G) Connection To A Tv - VOLTCRAFT BS-300XRSD Bedienungsanleitung

e) Monitor arm band

• Unpack the arm band and attach it to the arm.
• Attach the removable monitor to the metal
plate. Please note the correct direction .
The metal point on the monitor should fit
into the hole on the plate. Push the monitor
downwards to fix it onto the arm band.

f) Connection to a PC

• Open the cover on the right next to the monitor.
• Connect the mini USB plug to the appropriate socket and connect the USB A plug to a free
USB interface of your computer.
• The endoscope is now used as a card reading device. This enables you to read stored data
from the micro SD card on the PC.
• First disconnect the connection via the operating system before unplugging the USB cable.
The LED battery lights up orange and the battery of the monitor is charged when
connecting the monitor to a PC with the USB cable.
It is possible to connect the monitor to a PC if the monitor is separated from the
endoscope.
Do not connect the endoscope basic unit to a PC if you have removed the monitor
from the endoscope.

g) Connection to a TV

• First set the video output format (see chapter "Settings").
• Open the cover on the right next to the monitor.
• Connect the jack plug of the video cable to the video output (14) on the endoscope and
connect the cinch plug to the video input of the TV.
• As a result the picture on the monitor turns off and the camera picture is displayed on the
TV. Press the MENU button to display the menu on the TV. The device is operated with the
buttons on the monitor.
• Recorded videos can be played on the TV.
33