Unitest 3000 Bedienungsanleitung Seite 22

Description of Menu Keys
Description of Menu Keys:
Shift Shift
The second function of the double function keys is
only activated when the
same time.
The key can be used to switch levels: Table I,
Table II, Reference Range I, Reference Range II, and
Reference Range III.
Shift Shift
+
The key is used to perform extreme or man-
ual temperature compensation. This key is only ac-
tivated when the
Shift Shift
time.
Switching to the material to be measured: copper /
aluminium
Shift Shift
+
Switching the measurement units: meter / feet, or
. This key is only activated when the
key is pressed at the same time.
Clear all
Send
Send
The key is used to start the transfer of the data
memorised in the UNITEST Cable Length Meter
3000 to the PC.
Clear all
Shift Shift
Send
+
clears the total internal memory. The cu-
Clear all
mulative data memory is not cleared. This function
key is only activated when the
Clear all
pressed at the same time.
The key is used to activate the cumulative data
memory. The measurement data within the same
measurement range is added, i.e. several rings of
the same cable type can be added.
22
key is pressed at the
Shift Shift
key is pressed at the same
Shift Shift
key is
Shift Shift
Shift Shift
+
The key is used to switch on the display light.
To reduce the battery consumption, the display light
is switched off after approx. 30s.
The key is only activated when the
pressed at the same time
When pressing the
the same time the reference cable lengths within the
reference range or, for manual temperature com-
pensations, the temperatures are set.
Shift Shift
+
The key is used to save the previously set ref-
erence cable lengths.
The key is only activated when the
is pressed at the same time.
When the key and the
at the same time the reference cable lengths within
the reference range or, for manual temperature
compensation, the temperatures are set.
The key is used to save a measurement re-
sult. If several measurement data have been
summed up in the cumulative data memory the sum
can be transferred into the data memory by press-
ing the key.
Shift Shift
+
deletes the last value saved. The cumulative
data memory is not influenced.
The key is only activated when the
is pressed at the same time.
Briefly pressing the
is switched on and starts the measurement.
When keeping the
time the cable length meter is switched off.
key is
Shift Shift
key and the key at
key
Shift Shift
key are pressed
key
Shift Shift
key the cable length meter
key pressed for a longer