Concord 3346z Kurzanleitung Seite 4

1
LOADING THE BATTERIES AND THE SD MEMORY CARD
fig.1.1
1. Open the Battery/Memory Card door. (fig.1.1)
2. Insert the batteries and the SD memory card (sold separately). (fig.1.2-1.3)
3. Close the door.
2
TURNING THE CAMERA ON
Press and hold the Power Button (
Note: To extend battery life:
• The LCD will turn off after 1 minute of inactivity. After the LCD is
automatically turned off, the Flash Ready LED blinks. Press any buttons
to reactivate the LCD.
• The camera will automatically power off after 2 minutes of inactivity.
Press and hold the Power (
camera back on.
3
SETTING THE LANGUAGE, DATE AND TIME
When the camera is powered on for the first time, the Language, Date and Time menus will appear.
fig. 1.1
1. Press or to highlight the desired language. (fig. 1.1)
2. Press the OK button to select. The next screen will show the DATE/TIME SETUP page. (fig. 1.2)
3. Press to highlight the Date field, the Time fields, the Date Format field or the Time Format field. The
selected segment will blink.
4. Press or to change the number in the blinking position. Press
5. Press the OK button to exit the DATE/TIME setting. The next screen will display live view.
DZ QSG(515653-00)-E 2
fig.1.2
) for more than 1 second to turn the camera on.
) Button for more than 1 second to turn the
2
3
1
3
5
2
A
AWB
⁄ ⁄
fig.1.3
A
AWB
DATE/TIME SETUP
01 - 01 - 2004
01 : 01 AM
MM - DD - YYYY
12 - HOUR
RETURN SET
OK
fig. 1.2
to go to the next field.
A
2004.7.10, 10:13:42 AM
AWB
A
AWB
⁄ ⁄
2
3