Using The Remote Control; Card Selection Screen; Thumbnail Screen - Braun Phototechnik digiframe 88 Bedienungsanleitung

BN, BA_DF88_0709_GB.qxd
1 2

Using the remote control

The remote control included with your Digital Pic-
ture Frame may look slightly different from the one
shown here, but it offers the same buttons and
functions.
POWER Press POWER to turn on and off
the frame
SETUP Press for setup
Left
Right
Up
Down
ENTER Confirm your operation PAUSE/PLAY
EXIT Exit to the previous menu
ROTATE Rotate Pictures at 90/180/270°
ZOOM Zoom in the photo
SLIDESHOW Slideshow your digital pictures at the
desired transition effect
Replacing the remote control battery
1. Hold the remote control with the control buttons
facing downward.
2. While pressing the ridged lug of the battery
cover to the inside, pull the tray out.
3. Place a CR2025 lithium battery on the tray with
the positive "+" end facing toward you.
4. Close the tray.
15.07.2009 18:47 Uhr
E N G L I S H
Seite 4

Card selection screen

Use the Select Card menu to choose between
memory cards and the built-in memory.: Memory,
SD/MMC, USB
1. To open the Select Card menu, press the EXIT
button repeatedly to return to the menu screen.
2. Press the left and right arrow buttons to select
the desired memory card or the built-in memory.
3. Press the ENTER button to confirm your
selection.
Menu selection screen
Use the menu selection screen to choose the
appropriate menu (left/right arrow button/Enter).
Display Thumbnail screen
A) Photo
Display file list
B) File
Display calendar and time
C) Calendar
(only for model with this function)
Setting the fram options
D) Setup