Setting Up The Digital Picture Frame; Control Buttons And Remote Control; Using The Control Buttons - Braun Phototechnik digiframe 88 Bedienungsanleitung

BN, BA_DF88_0709_GB.qxd

Setting up the Digital Picture Frame

The Digital Picture Frame is easy to set up.
Just follow these steps:
1. Connect the AC power adapter to the Digital
Picture Frame and a wall outlet.
2. Insert a memory card into the appropriate slot.
Slot 1: Secure Digital™, MultiMedia Card™,
Memory Stick™
Slot 2: USB Flashdrive
Note: The card will only fit in one direction.
Do not force it. The card should fit snugly when
properly inserted. The Digital Picture Frame
will automatically start a slideshow of the photos
on the card.
3. To display photos individually, press the EXIT
button to open the thumbnail screen. Use the
four arrow buttons to choose a photo. Press the
POWER/ENTER button on the Digital Picture
Frame or the ENTER button on the remote
control.
Note: Pull the plastic tab sticking out of the
remote control. It protects the battery, and the
remote control will not work unless it is
removed.
4. To restart the slideshow, press the POWER/
ENTER button on the Digital Picture Frame again,
or press the SLIDESHOW button on the remote
control.
15.07.2009 18:47 Uhr
E N G L I S H
Seite 3

Control Buttons and Remote Control

You can access all of the Digital Picture Frame fea-
tures either with the buttons on the frame or via the
remote control.

Using the control buttons

The control buttons are located on top of the Digital
Picture Frame.
Button Action
UP Move highlighting up
select previous file
DOWN Move highlighting down
select next file
LEFT Move highlighting left
Display previous photo
RIGHT Move highlighting right
Display next photo
EXIT Exit current screen
Go back a screen
SETUP Open function menu
Power/ Select highlighted option
Enter Start slideshow
Pause
Play
Frame on/off
Up
Down
Left
Right
Stop/Exit
Menu
Power/Enter
/
DC Power Input (DC IN: 5V/1A)
Card slot (SD/MMC/MS)
USB
Holes for wallmount
Speakers
1 1
Stand