Search And Edit Channels; Child Protection/Password (Pin Code); Factory Defaults; Changing Time Settings - Clatronic dvb t 774 Bedienungsanleitung

CL_BDA_DVB_T774_GB_ka2.qxd

Search and edit channels

In order to quickly search a channel or to change
the features of saved channels, select the
"Installation" submenu.
Automatic channel search (Area search):
For an automatic search run, select the "Area
search" option.
Press the "OK" key.
All available channels will be searched and stored in
a programme slot.
Manual search:
The individual settings for a station can be carried
out in this menu.
For this method, it is necessary to know the sear-
ched-for programme's channel number, frequency
and bandwidth.
For changing the settings, use the "
" VOL+" arrow buttons.
After having carried out all settings, the search
run is activated by pressing the "OK" button.
All channels found in the area will be stored in a
programme slot.
Auto. Search:
In this menu, start and end frequency and band
width can be adjusted, in order to search for a spe-
cific frequency band.
Select the different options by using the "
and " CH+" arrow buttons.
For changing the settings, use the "
" VOL+" arrow buttons.
After having carried out all settings, the search
run is activated by pressing the "OK" button.
All channels found in the area will be stored in a
programme slot.
Child Protection/Password
(PIN code)
In the "Parental Lock", you can carry out the follo-
wing settings:
• changing the password.
Changing the password
You may change the password (PIN code) set in the
factory and enter any other four-digit number as
your personal PIN code. The password "0000" has
been pre-programmed in the factory.
Note your new password; once changed, only
the new code is valid for all password queries.
If you've forgotten your personal password,
you can assign a new password by means of
the master password "8888".
38
08.01.2008 17:26 Uhr
Enter the old password (PIN) using the numercal
keys.
Enter the new password using the numercal keys.
The display will automatically change to the menu
item 'New PIN'.
Enter the new password again.
The display will automatically change to the menu
item 'Confirm PIN'.
The new password is integrated.

Factory defaults

Select the "Factory default" submenu in the
"Digital TV" menu by using the "
"
VOL-" and
Press the 'OK' key to confirm.
You will be prompted to confirm your selection.
If you want to reset the receiver to factory setting,
select "Yes" by using the "
arrow buttons.
Select "No" if you want to exit the menu.
Confirm your selection with "OK".
Wait until the receiver re-starts.
This process may take a few minutes.
CH-"
Press the "EXIT" key to return to the TV channel.
VOL-" and

Changing time settings

You can select between the "Auto timer mode" and
"Manual timer mode" menus in the "Time" sub-
menu.
„Auto timer mode"
If GMT is activated, select deviation from main time
(GMT) of your local time by adjusting it in the "GMT
offset" submenu.
"Manual timer mode"
If GMT is activated, select "Date" using the
"
Use the " CH- and
arrow keys to select the date and confirm your
selection with the OK key.
To set the correct time use the "
"
'Time'.
Use the numeral keys to set the current time.
Press the "OK" button in order to save your
selection.
Seite 38
The receiver is reset to its condition on delivery.
All of your settings and stored data are deleted.
CH+" arrow buttons.
VOL-" and "
Switch on/of summer time in the "Summer
time" menu option.
CH-" and " CH+" arrow buttons.
CH+, VOL- and
CH+" arrow keys to select the menu item
CH-" and
VOL+"
VOL+"
CH-" and