Connecting A Digital Audio Receiver - Clatronic dvb t 644 Bedienungsanleitung

Connecting the receiver

Connecting a digital audio receiver

If you would like to use 5-channel audio transmission (Dolby Digital
Sound/AC3), you must connect your digital audio receiver to the
DVBT-644 receiver's coaxial output.
Attention!
Note the specifications for connecting in the operating instructions
supplied with your digital audio receiver.
The coaxial cable is not included in delivery.
Insert the coaxial cable into the "S/P DIF" connection on the
receiver.
Connect the coaxial cable to the digital audio receiver.
20