Clatronic dvb t 644 Bedienungsanleitung Seite 74

You may choose between the following options:
• On – You may supply an active room antenna with this voltage. A
voltage of 5 V is present at the receiver's antenna output.
• Off – You may connect a passive room antenna or home
antenna. No voltage is present at the receiver's antenna output.
Use the "VOL
Press the "OK" key.
To leave the menu, press the "EXIT" key.
Connecting a home antenna or passive room antenna
Connect the antenna cable's F connector to the "ANT IN" antenna
connection on the receiver.
Connecting an active room antenna
Attention!
Only an active room antenna without a separate power supply
may be connected to the receiver. The receiver may otherwise be
damaged.
Note the specifications in the operating instructions for your active
room antenna under all circumstances.
To use the receiver with an active room antenna, you must first
activate the voltage at the antenna output (see Page 14). In this
case, the active room antenna draws the necessary current from the
receiver's antenna connection.
Connect the antenna cable's F connector to the "ANT IN" antenna
connection on the receiver.
" and "VOL " keys to select the desired setting.
15