1. Turn the VOLUME control clockwise to switch on the device and set the desi-
red volume.
2. Move the band selector switch to the FM or AM position, depending on which
frequency band you would like to listen to.
3. Tune into the desired station using the TUNING regulator.
4. For VHF/FM mode pull out the telescopic antenna and turn it to improve recep-
tion.
5. An aerial is integrated into the device for the reception of AM stations. The
machine can be aligned to the station by turning it.
6. With the TONE control you can set the desired tone.
Switch-off
The device is switched off when the VOLUME control is turned to the OFF positi-
on. Unplug the device.
•
Before cleaning remove the mains lead from the socket.
•
Clean the housing with a soft, dry cloth without additives.
Model: .......................................................................................................... MR 689
Power supply: ....................................................................................... 230 V, 50 Hz
Protection class: ..................................................................................................... ΙΙ
Output rating:.........................................................................................20 W PMPO
Radio section:
Frequency ranges: ......................................................UKW / FM 88 ~ 108 MHz
This device has been tested according to all relevant current CE guidelines,
such as electromagnetic compatibility and low voltage directives, and has been
constructed in accordance with the latest safety regulations.
Subject to technical changes without prior notice!
05-MR 689 31
Listening to the Radio
UKW = FM, Medium Wave = AM.
HIGH (higher), LOW (lower)
Cleaning and care
Technical Data
.....................................................MW / AM 540 ~ 1600 kHz
GB
31
21.07.2005, 8:12:59 Uhr