Radio Operation - Jgc Rrmp 4700 Bedienungsanleitung

FUNCTION button repeatedly until the main display shows TUNER. MW(AM) or FM
1. Press the
frequency will appear on the display.
2. Press the BAND button on main unit or remote control to switch between the MW(AM) and FM
bands.
3. Tune to the desired station as follows:
• Manual Tuning
Repeatedly press the
station. Use the Manual Tuning method to tune to weak or distant stations that are not strong enough
to be recognized by the Automatic Tuning system.
• Automatic Tuning
Depress and hold the
The Tuner will search up or down the band for the next strong signal and stop on that station. Repeat
this procedure until the tuner stops on your desired station.
4. FM Stereo signal is indicated by the (( ST))
indicator.
If the FM Stereo reception is noisy or weak:
ID3 button on the remote control to
5. Press the
select FM Mono mode
RRMP4700 Portable CD Boombox All version.indd 49
or buttons until the display shows the exact frequency of the desired
or buttons until the display begins to move, then release the buttons.

RADIO OPERATION

49
4/23/09 6:39:00 PM