Inserting And Removing Flash Devices - Jgc Rrmp 4700 Bedienungsanleitung

INSERTING AND REMOVING FLASH DEVICES

Flash devices are inserted into compatible at the top panel of the unit.
Inserting and Removing USB Flash Memory Devices
USB
1. Insert the USB connector into the socket
on the unit and press gently to seat. The
connector can only be inserted one way.
2. Remove the device by gently pulling it out of
the socket.
Inserting and Removing USB Flash Card Devices
SD MMC
1. Insert the card into the slot by gently pressing
into position until it locks in place. Cards can
only be inserted one way.
2. Remove the card by gently pulling it out of
the slot.
• Be sure to use the proper card adapter if required. Failure to use the correct adapter may cause
damage to the memory card or the unit.
• Only one type of memory card can be inserted at one time.
RRMP4700 Portable CD Boombox All version.indd 37
37
4/23/09 6:38:56 PM