iCES ICR-240 Bedienungsanleitung Seite 6

volume level. The display changes to show the volume level indication (00 to 14)
during the volume adjustments, then changes back to the radio station frequency
and then the current time.
5. Press "HOUR / TUNING –" button (5) or "MIN / TUNING +" button (9) to show the
radio station frequency.
Pre-set Station Memory
1. The radio can store up to 20 FM stations.
2. To store a station in memory, tune to the desired radio station. Press and hold
down "TIME/PRESET" button (6) for approximately 3 seconds and "P01" on the
display will flash. Press "P+" button (7) or "P-" button (3) to the desired station
memory (P01 to P20). Press "TIME/PRESET" button (6) once to confirm.
3. Repeat the above steps for up to 20 stations.
4. To recall the station, press "P+" button (7) or "P-" button (3) until desired station
is reached.
Sleep mode
1. When the radio is on, press "SNOOZE / SLEEP / DIM" button (1) to enter sleep
mode. "OFF" will be displayed. Press "SNOOZE / SLEEP / DIM" button (1)
repeatedly for the duration of the "SLEEP" time. The range of "SLEEP" time is 90
minutes to 10 minutes, as displayed on the screen.
NAP
Set the desired NAP time and the radio will turn on automatically after the preset
time.
1. When the radio is off, press and hold "ON / OFF / NAP" button (2) for
approximate 4 seconds and the display and FM indicator (D) will flash.
2. Press "P+" button (7) or "P-" button (3) to set the desired nap time (45, 60, 90
or 120 mins)
3. Press "ON / OFF / NAP" button (2) to confirm.
DIMMER
When the radio is off and the current time showing, press "SNOOZE / SLEEP / DIM"
button (1) to select the brightness of the display for high or low.