Description Of The Controls - AEG BSS 4813 Bedienungsanleitung

Vorschau ausblenden

Seite von 62

/ 62
Inhalt
Inhaltsverzeichnis
Lesezeichen

Inhaltsverzeichnis

Verfügbare Sprachen

NOTE:

If possible, adjust the volume of the external unit to a com-

fortable level.

Cordless via Bluetooth

Bluetooth involves a technology for wireless radio connec-

tion of devices over a short distance. Devices with Bluetooth

standard are transmitting between 2.402 and 2.480 GHz in

the ISM band (Industrial, Scientific and Medical). Interference

can be caused for example by WLAN-networks, DAB radios,

cordless phones, or microwave ovens which work on the

same frequency band.

This device offers you the possibility to use a Bluetooth-

enabled device. The functional radius is limited to approx.

15 metres depending on the surroundings and the unit used.

If your playing device supports the A2DP profile (Advanced

Audio Distribution Profile) and has a music-player function,

then you can also wirelessly transfer music to the device. The

A2DP profile involves a multivendor Bluetooth profile. By

streaming, stereo-audio signals are wirelessly transferred be-

tween the playing device (source) and the receiving device.

To remotely control the source, the playback device has to

support the AVRCP profile (Audio Video Remote Control

Profile).

Due to the different device manufacturers, models, and

software versions, a full functionality cannot be guaranteed.

• Logging on devices (Pairing)

Before you listen to music via the unit, you must pair the

devices.

1. Ensure, that the Bluetooth function is activated in

your player (e.g. mobile phone). For this, refer to the

operation manual of your player.

2. Press the SOURCE button (2/1) repeatedly, until

"PAIRING" is shown on the display. The appliance

is in pairing mode as long as the Bluetooth control

lamp (4) is flashing. If no connection is established

within approx. 1 minute, "NO CON" will briefly ap-

pear in the display. Press the PAIR/

re-activate the paring mode.

3. Chose the Bluetooth menu in your player and

operation manual of your player. The device "AEG

BSS 4813" will show in your player as a selection.

NOTE:

Only one playback unit can be connected to the

speaker. If the speaker is already connected to

another playback unit, the speaker will not appear

in the BT selection menu.

4. Now enter the password "0000" in your player,

depending on the device manufacturers, model, and

software version.

If the pairing was successful, the display will briefly show

"CONNECT" and the Bluetooth control lamp (4) lights up.

For operation, please refer to the section "Description of the

controls".

If possible, adjust the volume of the external unit to a com-

fortable level

NOTE:

• Depending on the device manufacturer, you need to

perform the registration (PAIRING) again to connect the

devices.

• In case of problems during repairing of a playback

device, deactivate the WiFi-/ and mobile data function

in your playback device.

• The Bluetooth compatibility cannot be ensured for

devices (e.g. mobile phones) getting released in the

future.

• To ensure an optimal connection, make sure that the

battery of your player is completely charged.

• Some of the mobile phone brands have an energy-sav-

ing mode. Deactivate the energy-saving mode as it can

otherwise result in problems during the data transfer

through Bluetooth.

• To be able to transfer audio data, Bluetooth needs to

stay activated in your player Observe the operation

manual of your player.

• If a mobile phone on which you are playing music

receives a call, the music will be interrupted. Sound

will however not be transmitted via the speakers. After

you have terminated the phone call, the devices will be

connected to each other again. You may have to restart

playback.