Installing The Speakers; Installing The Front Speakers; Installing The Center Speaker - Yamaha NS-PA120 Bedienungsanleitung

Front
left
Surround left

Installing the front speakers

Place the two front speakers on the left and
right sides of the TV, facing directly forward.
Screw
Philips driver

Installing the center speaker

3
En

Installing the speakers

Front
right
Center
Surround right
Adaptor
Bottom of the
front speaker
Base
Fastener
Peel of the seal.
TV rack, etc
Before you connect the speakers, place each
speaker in its respective location. Speaker
positioning is very important as it affects the
overall sound quality of the system. Place the
speakers in locations that will optimize the
sound quality at your listening position. Refer
to the illustration.
Note
• The speakers feature a magnetically
shielded design. However, there is still a
chance that placing them too close to a
CRT-type TV set might impair picture
color. Should this happen, move the
speakers away from the TV set.
■ Attaching the speaker stands
Lay the front speaker (with the front side up)
on the floor and then attach the adaptor and
base to the speaker by using the supplied
screws.
Notes
• When moving the front speaker, be sure to
have another person to support it.
• When laying the front speaker, use a blanket
or cushion to avoid scratches on the floor.
• Tighten the screws firmly so that the front
speaker never gets shaky.
Place the center speaker centrally between the
front speakers, facing directly forward.
When placing it on a flat surface (TV rack,
etc), affix the supplied fasteners to bottom of
the speaker as shown left.
When wall-mounting it, see "Wall-mounting
the speakers" (page 4).
Note
• Wipe the surface clean before affixing the
fasteners. If the surface is dirty, oily or wet,
adhesive strength is weakened and the
speaker may fall.