Technical Specifications - ION SOUND SPLASH Kurzanleitung

LISTENING TO MUSIC & USING THE PHONE
Note: You must power on and pair SOUND SPLASH with your Bluetooth device before
using it to listen to music or use it as a speakerphone.
Listening to Music:
1. Press the Play/Pause button on SOUND SPLASH to play music from your Bluetooth-
enabled device. Depending on your Bluetooth device, you may need to manually open
a media player on your device.
2. Adjust the Volume buttons on SOUND SPLASH. You may also need to adjust your
device's volume.
Using the Phone:
1. When you have an incoming call, SOUND SPLASH's speaker will play your phone's
ringtone. To answer the call, press SOUND SPLASH's Call Receive button.
Note: If you get an incoming call during music playback, the music will pause until you
end the call.
2. Speak into the microphone (located below the
volume using the Volume buttons.
3. To end the call, press the Call End button.

TECHNICAL SPECIFICATIONS

Power: Rechargeable lithium-ion battery
Water resistant class: IPX4 (protected from splashing water but is not submersible)
Bluetooth protocol: A2DP
Dimensions (H x W x D): 4.5" x 2.9" x 1.2"; 114.3 mm x 73.6 mm x 30.5 mm
Weight: 0.3 lbs.; 0.1 kg
Contact ION Audio technical support for assistance www.ionaudio.com/support
Play/Pause button)
5
and adjust the call