Bluetooth Pairing - ION SOUND SPLASH Kurzanleitung

BLUETOOTH PAIRING

Bluetooth pairing occurs when two
Bluetooth devices
communicate with each other, enabling
them to link and exchange data.
Pairing with iPhone®, iPad®, and
iPod touch®:
Note: iOS 4.0 or higher is required.
1. Press and
SPLASH's power button for 4-5
seconds to power it on.
2. Press and hold SOUND SPLASH's Bluetooth button for 2 seconds. You will hear hear a
tone and the blue LED will flash.
3. On your iPhone, go to Settings > General > Bluetooth. Slide the Bluetooth slider to
"On." SOUND SPLASH will attempt to pair with nearby Bluetooth devices.
4. On the iPhone's screen, "ION SOUND SPLASH" will appear as a Bluetooth device. Tap
it to select it.
5. If your iPhone requires a passcode or PIN, enter the number zero ("0") four times.
Pairing with other devices:
1. Press and hold SOUND SPLASH's power button for 4-5 seconds to power it on.
2. Press and hold SOUND SPLASH's Bluetooth button for 2 seconds. You will hear a tone
and the blue LED will flash.
3. Go to your device's Bluetooth settings menu to turn on Bluetooth.
4. On your device's screen
Select it to pair and connect with
5. If your device requires a passcode or PIN, enter the number zero ("0") four times.
6. If your device fails to pair correctly, simply power SOUND SPLASH on/off and attempt
to pair again.
iPhone, iPad, and iPod touch are trademarks of Apple, Inc., registered in the U.S.A.
agree to
hold SOUND
"ION SOUND SPLASH" will appear as a Bluetooth device.
SOUND
SOUND SPLASH LED activity:
Blinking Blue LED = Bluetooth pairing mode
Solid Blue LED = Connected to a Bluetooth
device
Blinking Blue and Red LED = Incoming call
Blinking Red LED = Low battery on SOUND
SPLASH
SPLASH.
4