Peaq PPA55BT-BL Bedienungsanleitung Seite 22

ENGLISH
• Do not touch, press or rub the sur-
face of the product with sharp or
hard objects.
• To reduce the risk of fire or electric
shock, do not expose the device to
rain or humidity.
• Do not impede ventilation by cov-
ering the ventilation openings with
items, such as newspapers, table-
cloths, curtains, etc. Do not insert
any objects.
• No naked flame sources, such as
lighted candles, should be placed
on the product.
• Make sure no objects or liquids
penetrate through openings into the
housing.
• Never immerse electric parts of the
product in water or other liquids
while cleaning or using it. Never
place the product under running
water.
• Do not place the product in the vi-
cinity of devices producing strong
magnetic fields (for example motors,
loudspeakers, transformers).
• Do not expose the product to di-
rect sunlight, humidity, dirt, hot light
sources or strong magnetic fields.
Do not expose the product to high
temperatures and strong vibrations
and avoid high mechanical stress.
• The product may not function prop-
erly or not react to the operation of
any control due to electrostatic dis-
22
_PPA55BT_BL_160413_V04_HR.indb 22
charge. Switch off and disconnect
the product; reconnect/switch on
after a few seconds.
• If the product shows damages, do
not use it any longer and have it re-
paired by a qualified technician, or
contact our customer service depart-
ment. Do not disassemble the prod-
uct, and do not try to repair it yourself.
• The light source contained in this lu-
minaire shall only be replaced by the
manufacturer or his service agent or
a similar qualified person.
• Attention! Please do not look di-
rectly into the light emanating from
the LED. Do not point the LED light
directly into the eyes.
• This product shall be charged by an
approved independent SELV power
supply (EN 61347-2-13):
– With output voltage equal to rated
voltage of this product; and
– With output power at least equal
to rated power of this product; and
– With protection index of IPX4 or
above for the power supply, the
mains plug can be using an IPX4
socket
• Remove the batteries from the
product before disposal.
• The product must be disconnected
from the supply mains when remov-
ing the battery.
• Battery must be disposed safely and
environmentally friendly manner.
13/4/16 5:06 PM