Wiring Loewe Flat Tv - Auro - Individual Sound - Loewe Centerspeaker I Compose Bedienungsanleitung

Connection
Wiring Loewe Flat TV – Auro – Individual Sound
Loewe Flat-TV
Digital audio TV -> Auro
Loewe
Auro
Connect the cables as shown in the graphic:
Connect Auro to socket AV2 of the Loewe Flat TV.
You must use a Euro-AV cable in which all contacts are assembled and
connected.
Letters are embossed on the sides of the plugs on the six-wire cinch cable.
Gray plug: "C" for center channel, black plug: "LFE" for Subwoofer; red plug:
"FR" for front right or "SR" for surround right, white plug "FL" for front left
and "SL" for Surround left.
Two-wire (thin) cubic plug cable from Auro to the "Master" socket on Indivi-
dual Sound (connect the end of the cable with kink protection to Auro). The
cubic plugs are secured in the socket by a lug.
AV2-SCART
CENTER
COMPONENT IN
PREOUT AUX1 IN AUX OUT AUX 2
L C R L L
DIGITAL
IN
DIGITAL
OUT
SL LFE SR R R
12V / 15mA
Six-pole cinch
Audio cable cinch -> SCART
(available in specialised
trade)
AUDIO OUT L/R
DIGITAL OUT
SERVICE
Component Video
(available in specialised
trade)
EURO-AV-cable
Y
TO TV
Pb
TV EXT Pr
COMPONENT
L-LINK VIDEO OUT
L-Link-cable
Cubic plug cable
You have to press down the lug À rst before you can remove the cubic plug.
To play the TV sound over Auro/Individual Sound, connect the digital audio
output of the TV set "AUDIO DIGITAL OUT" with the "DIGITAL IN" input from
Auro with a cinch cable.
Before establishing the L-Link, Auro and the TV must be in the powerless
state otherwise these devices cannot identify each other after switching on.
Loewe Individual Sound System
ON
Power OUT
R
Surr.
OFF
L
R
Bass Intensity
Front C
Min. Max.
L
Phase
0 180
Line IN
Crossover Frequency
Right Subw. Left
Surr.
50 250.
Front
Right Center Left
230V~50/60Hz
System connector
13 -