Peaq PPA300 Bedienungsanleitung Seite 33

ENGLISH
Troubleshooting
No sound
No charging
Specifications
Rated voltage:
Power consumption:
Power consumption standby:
6.1 Channel power output:
Frequency response:
Sensitivity:
Overload source e.m.f.:
Separation:
S/N:
Remote Control:
Dimensions (W x H x D):
Weight:
Operating/ambient temperature:
Verify that the power adaptor and its jack are
connected properly.
Make sure the power button is in ON position.
Make sure the appliance is ON (White LED is
on).
Check if the iPhone/iPod is connected properly
to the docking station.
Make sure the volume is set at a audible listen-
ing level.
Check if music is playing from your iPhone/
iPod.
Check if a cable a the LINE IN overrides the
iPhone/iPod playback.
Check if the iPhone/iPod is connected properly
to the docking station.
100-240 V~ / 50/60 Hz
< 48 W
< 1 W
6 x 5 W & 1 x 10 W
L/R CH (60 Hz - 20 kHz at +1 / -2 dB)
L/R: 550 mV
> 2 V
> 55 dB
60 dB
> 5m
215 x 215 x 215 mm
6.0 kg
-10 °C to +40 ˚C
32