Connecting To A Tv And External Devices; Selecting An External Device To Use - Samsung HT-H7750WM Benutzerhandbuch

Connecting to a TV and External Devices

POWER
FRONT TOP R FRONT TOP L
LAN
FRONT R FRONT L
SUBWOOFER CENTER
SPEAKERS OUT HDMI OUT 1 HDMI IN 2
Red
R
White
W
HDMI IN
Connecting to a TV
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on
your TV. If the TV supports ARC, you can hear the audio from your TV through the home cinema with only this cable
connected. See page 18 in this manual and the section on ARC in your TV's user's manual for details.
Connecting to External Devices
Method 1 HDMI IN : Connecting to an External Component with an HDMI Cable
Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack
on your digital device.  Select the HDMI1 or HDMI2 mode.
Method 2 AUX IN : Connecting an External Analogue Component
Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on
the external analogue component.  Select the AUX mode.
• Be sure to match the colours on the cable plugs to the colours on the input and output jacks.
Method 3 OPTICAL : Connecting an External Digital Audio Component
Use to connect the digital audio output of digital signal components such as Cable Boxes and Satellite
Receivers (Set-Top-Boxes) to the home cinema. Using a digital optical cable (not supplied), connect the Optical
Digital Audio In jack on the product to the Digital Optical Out jack of the external digital device using a digital
optical cable.  Select the D. IN mode.
✎
To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.
✎
This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.
✎
This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.

Selecting an External Device to Use

To select an external device after you have connected it, press the
button, the mode changes in this order : BD/DVD
AUX IN FM ANT
L
OPTICAL
R
DIGITAL
AUDIO IN
HDMI OUT
Method 1
External
Devices
D. IN
13
LAN
1 HDMI IN 2
Method 2
HDMI OUT AUDIO OUT
SOURCE button. Each time you press the
AUX HDMI1
- English
AUX IN FM ANT
L
OPTICAL
R
DIGITAL
AUDIO IN
Method 3
OPTICAL OUT
HDMI2 FM BT