Update Now; Auto Update - Samsung HT-H7750WM Benutzerhandbuch

Settings

Update now

You can use Update now to update the software
through your network connection or by using a USB
flash drive. The network instructions are below. The
USB flash drive instructions are on this page.
1. Select Update now, and then press the
button. The Update now pop-up appears.
2. The product searches on line for the latest
software version.
3. If it does not find an update, the "There are no
new updates for you at the moment." pop-up
appears. Press the OK
4. If it finds a new version, the Update Request
pop-up appears.
5. Select OK. The product upgrades the software,
turns off, and then turns on automatically.
6. If you do not select OK or Cancel in one minute,
the product stores the new upgrade software.
You can upgrade the software later using Auto
update.
7. If you select Cancel, the product cancells the
upgrade.
✎
When the system upgrade is done, check the
software details in the Product Information section
of the Contact Samsung screen.
✎
Do not turn off the product during the Software
Upgrade. It may cause the product to malfunction.

Auto update

You can set the Auto update function so that the
product downloads new upgrade software when it is
in Auto update mode.
In Auto update mode, the product is on, but its
Internet connection is active. This allows the product to
download upgrade software automatically, when you
are not using it.
Press the 78 buttons to select Auto update
1.
mode, and then press the
2. Select On or Off.
If you select On, the product will automatically
download new upgrade software when it is
in Auto update mode with the power on. If it
downloads new upgrade software, the product
will ask you if you want to install it when you turn
the product on.
✎
To use the Auto update function, your product
must be connected to the Internet.
OK
button to exit.
OK button.
26
- English
Update by USB
1. Visit www.samsung.com.
2. Click SUPPORT on the top right of the page.
3. Enter the product's model number into the
search field. As you enter the model number, a
drop down will display products that match the
model number.
4. Left click your product's model number in the
drop down list.
5. On the page that appears, scroll down to and
then click Firmware Manuals & Downloads.
6. Click Firmware in the centre of the page.
7. Click the ZIP button in the File column on the
right side of the page.
8. Click Send in the first pop-up that appears.
Click OK in the second pop-up to download and
save the firmware file to your PC.
9. Unzip the zip archive to your computer. You
should have a single folder with the same name
as the zip file.
10. Copy the folder to a USB flash drive.
11. Make sure no disc is inserted in the product,
and then insert the USB flash drive into the USB
port of the product.
12. In the product's menu, go to Settings >
Support > Software Update.
13. Select Update now.
14. The product searches for the software on the
USB drive. When it finds the software, the
Update Request pop-up appears.
15. Select OK. The product upgrades the software,
turns off, and then turns on automatically.
16. There should be no disc in the product when
you upgrade the software using the USB jack.
✎
When the system upgrade is done, check the
software details in the Product Information section
of the Contact Samsung screen.
✎
Do not turn off the product during the software
upgrade. It may cause the product to malfunction.
✎
Software upgrades using the USB jack must be
performed with a USB flash drive only.