Cleaning And Care - Miele T 6251 professional Gebrauchsanweisung

Cleaning and care

Before cleaning disconnect the machine from
the power supply by switching off at the isola-
tor or the on-site mains switch.
Disinfecting and cleaning agents often have
compounds containing chlorides in them. If
these agents dry onto the steel surfaces, the
residual chlorides will attack the steel and can
cause rusting. If you accidentally spill an agent
containing chloride on the machine it should
be rinsed off with water and dried with a soft
cloth.To protect your machine from rust dam-
age we recommend only using chloride free
disinfecting and cleaning agents. If you are not
sure about a particular agent contact the
manufacturer for advice.
Do not use a high pressure cleaner or
water jet to clean the machine.
Cleaning:
Clean the fluff filter (5) at least once a day, de-
pending on the amount of fluff that has
collected and when the Clean fluff filter indica-
tor light comes on. Do not remove the fluff
filter and be very careful not to damage it.
The housing, control panel and any plastic
parts must only be cleaned using a mild clean-
ing agent or with a soft, damp cloth and then
dried.
Stainless steel housing should be cleaned
with a proprietary stainless steel cleaning
agent following the manufacturer's instructions
on the packaging.
Never use abrasive cleaning agents to
clean the machine.
If you are unsure about a particular product or
need further advice please contact your
nearest Miele Sales office. See back page for
address.
The following should be checked and if neces-
sary cleaned once a year by a Service
Engineer:
The whole interior of the tumble dryer
The fins on the ventilation fan
If appropriate maintenance is not carried out
regularly the efficient running of the machine
may be impaired and operational faults repre-
senting a fire hazard can occur.
13 «M.-Nr. 06 411 820 - GB - »