Notes; Anti-Crease; Interrupting A Programme; Emergency Stop Switch - Miele T 6251 professional Gebrauchsanweisung

Note

Anti-crease

If the laundry is not removed from the machine
at the end of the programme an anti-crease
phase switches in automatically. There is
drum movement at intervals to minimise
creasing in the laundry.
The anti-crease phase lasts about 59 minutes.
Interrupting the programme
The door can be opened during operation to
add articles of laundry. Do not reach into a
moving drum.
To continue the drying process:
Close the drum door.
The fan automatically switches on as a
safety measure if the temperature in the in-
terior of the dryer is too high.
The programme sequence lights for drying,
cool air, anti-crease/end and the data in
the display flash.
h
Press the Start button.
If the drying programme has been interrupted,
either by opening the door, opening the fluff fil-
ter panel (6), or operating the Emergency stop
switch, the Start button has to be pressed to
start the programme again.
If a different programme is required, first turn
the programme selector to the
tion and then to the desired programme.
Press the Start button to start the new pro-
gramme.
The On indicator light flashes if the
programme selector is turned to a different
position after the start of a programme. It
stops flashing when the programme selector
is turned back to the programme originally
selected or is turned to the
finish the programme.

Emergency stop switch

Only use this switch in an emergency. When
activated the tumble dryer is stopped immedi-
ately. Do not use it in normal operation to
switch the machine off.
To reset the Emergency stop switch after it
has been used, turn the ribbed disc clockwise.
r
End posi-
12
r
End position to
«M.-Nr. 06 411 820 - GB - »