Enabling/Disabling Switching Via Buttons On The Front Panel; Enabling/Disabling Switching Via Hotkeys - Guntermann & Drunck DVIMUX8-OSD-USB Installation Und Bedienung

6. Leave the menu by pressing
7. Press to save your settings.
F1

Enabling/disabling switching via buttons on the front panel

Switching between different computers via the buttons at the device's front panel is
enabled in the default settings.
If desired, you can disable the buttons via OSD.
How to enable/disable the switching via buttons:
1. Press (standard) to open the On-Screen Display.
Ctrl+Num
2. Press F1 to open the menu.
3. Use the Arrow keys
4. Use the Arrow keys
lowing options:
Yes:
No:
5. Press to save your settings.
F1

Enabling/disabling switching via hotkeys

Switching between different computers via the hotkeys is enabled in the default settings.
If desired, you can disable this type of switching via OSD.
How to enable/disable switching via hotkeys:
1. Press Ctrl+Num (standard) to open the On-Screen Display.
2. Press F1 to open the menu.
3. Use the
Arrow keys
4. Use the
Arrow keys
lowing options:
Yes:
No:
5. Press F1 to save your settings.
Enter .
to select System Config
to select Select via Button
Switching via buttons at the front panel enabled (default)
Switching via buttons at the front panel disabled
to select
System Config
to select
Select via Hotkey
Switching via hotkeys enabled (default)
Switching via hotkeys disabled
and press Enter .
and press Space to select one of the fol-
and press .
Enter
and press to select one of the fol-
Space
G&D DVIMUX8-OSD-USB · 48
Configuration