Rear Spacers; Door Reversibility - AEG S63300KDW0 Benutzerhandbuch

REAR SPACERS

4
LEVELLING

DOOR REVERSIBILITY

3
2
1
3
4
2
5
1
You can find the two spacers in the bag
with documentation.
Do these steps to install the spacers:
1. Release the screw.
2. Engage the spacer below the screw.
3. Turn the spacer to the right position.
4. Tighten again the screws.
Accurate levelling prevents the vibration
and noise of the appliance during opera-
tion. To adjust the height of the appliance
loosen or tighten the two adjustable front
feet.
To carry out the following opera-
tions, we suggest that this be
made with another person that
will keep a firm hold on the doors
of the appliance during the opera-
tions.
To carry out the following operations, we
suggest that this be made with another
person that will keep a firm hold on the
doors of the appliance during the opera-
tions.
To change the opening direction of the
door, do these steps:
• Remove the plug from the power sock-
et.
• Tilt back the appliance carefully so that
the compressor cannot touch the floor.
• Remove the plinth.
• Unscrew and remove the lower hinges.
• Remove the door.
ENGLISH
39