Cleaning And Care; De-Scaling - Superior KE-7951T Bedienungsanleitung

GLASS TEAPOT WARMING FUNCTION /
CLEANING AND CARE / DE-SCALING
• When the temperature sensor has measured the
current temperature of the tea, this is shown in
the display. The red "Current Temp" indicator
will light up.
• The desired warming temperature can now be
set. The "Setting Temp" indicator lights up.
• Temperatures between 50°C and 85°C can be
set. The default temperature is 70°C.
• In order to set the desired temperature,
press the "+" (increase temperature) or "– "
(decrease temperature) keys.
• A short press on the "+" or "–" buttons
increases or decreases the warming temperature
by 1°C at a time.
• If the "+" or "–" button is held down for longer,
the temperature increases or decreases by 5°C
at a time.
• When setting the temperature, the display shows
the temperature that is currently set, and the
"Setting Temp" indicator lights up.
• The setting can be changed at any time.
• To end the warming function, press the "ON/
OFF" button. The appliance will switch off.
• The warming system stops automatically after
90 minutes in order to prevent the appliance
from overheating. To continue the heating
function, press the ON/OFF button once more,
and repeat the instructions as above.

CLEANING AND CARE

Warning:
Before cleaning the appliance, always remove the
plug from the plug socket and leave the appliance
to cool completely.
• During cleaning, the appliances, base unit,
power cable and plug must not be submerged in
water or other fluids.
• The base unit, power cable and plug must only
be cleaned with a dry cloth.
• The outside of the kettle can be cleaned with
a damp cloth and must be thoroughly dried
afterwards.
• After using the glass teapot, always rinse
thoroughly and dry in order to remove the
unwanted smell of tea.
• Wash the filter of the glass teapot with water
and a mild detergent.
• Do not use any abrasive substances, abrasive
sponges or strong detergents, as these can
damage the surface of the appliance.

DE-SCALING

The kettle must be de-scaled regularly. The
frequency of de-scaling depends on the hardness
of the water in your area and on how frequently
you use your appliance. In order to guarantee the
safe operation of the appliance, visible signs of
limescale must be removed immediately. To de-scale
the appliance, use a mixture of one part vinegar
(not flavoured vinegars) to three parts water.
• Fill the kettle to the maximum level with the
vinegar and water mixture and leave to work in
the appliance for approximately one hour.
• Next, boil the vinegar solution in the kettle and
pour this away.
• Fill the kettle to the maximum level once more,
this time with clean water, boil, and throw the
water away.
19 19
GB