Herunterladen Inhalt Inhalt Diese Seite drucken

Selecting The Place Of Installation; Implantation; Choix Du Lieu D'implantation; Posizionamento - Carrier Premor 1585 G Betriebsanleitung

Inhaltsverzeichnis

Werbung

4 Installation
4.1 Selecting the place of
installation
In selecting the place of installa-
tion, ensure that the following in-
structions are observed, this being
vital for proper and troublefree
working of the case:
Do not install the case out-
-
doors.
Do not install the case in the
-
vicinity of heating radiators or
other heat sources. Do not
install the case where it is
exposed to direct sun light
(e.g. through windows) (fig. 1).
Do not install the case where it
-
is exposed to drafts from
ventilators or open doors (fig.
2).
Pay attention to air outlet from
-
air conditioners/ventilators (fig.
3)
Keep the air intake and outlet
-
area around the plinth area of
the case clear of cartons and
other obstacles (fig. 4).
When
installing
-
against a wall, make sure that
the refrigeration unit fan is free
to take in the ambient air from
the room via the plinth area
and discharge it.
When installing several case
-
alongside
or
behind
another, be sure to observe
the specific installation plan.
14
4 Implanation
4.1 Chiox du lieu
d'implantation
Pour un fonctionnement sans dé-
faut de l'îlot, les points suivants
doivent absolument être observés
lors du choix du lieu d'implantation:
Ne pas installer l'îlot à ciel
-
ouvert.
Ne
-
proximité
chaleur,
Chauffages. Eviter l'ensoleille-
ment direct (p. ex. par une fe-
nêtre) (fig. 1).
Ne
-
courant d'air de ventilateurs ou
de portes ouvertes (fig. 2).
Observer la sortie d'air des in-
-
stallations de conditionnement
d'air/ d'aération (fig. 3).
Ne pas obstruer le soubasse-
-
ment de l'îlot avec des objets,
comme p. ex. cartons de
produits (fig. 4).
the
case
En cas d'implantation murale,
-
veiller à ce que le ventilateur
du groupe frigorifique puisse
aspirer sans entrave l'air am-
biant du local à l'avant du sou-
bassement et l'évacuer par les
ouïes d'aération.
En cas d'implantation de plu-
-
one
sieurs l'îlot l'une à côté de
l'autre ou l'une derrière l'autre,
observer absolument le plan
concernant l'implantation cor-
respondante.
pas
installer
l'îlot
de
sources
de
comme
p.
ex.
pas
exposer
l'îlot

4 Posizionamento

4.1 Scelta del luogo di
posizionamento
Per garantire un esercizio senza
guasti
del
l'isola,
assolutamente i seguenti punti:
Non posizionare l'isola all'a-
-
perto.
à
Non
posizionare
-
prossimità
termiche, ad es. termosifoni.
Evitare irradiazioni solari di-
rette (ad es. Attraverso fines-
tre) (fig. 1).
au
Non esporre l'isola alle correnti
-
d'aria di ventilatori o di porte
aperte (fig. 2).
Fare attenzione all'aria di sca-
-
rico degli impianti di condizio-
namento/ ventilazione (fig. 3).
Non chiudere la zona inferiore
-
del l'isola con oggetti, ad es.
scatole di cartone (fig. 4).
Durante il posizionamento con-
-
tro una parete assicurarsi che
il ventilatore dell'unità moto-
condensante possa aspirare
liberamente l'aria dall'ambiente
attraverso la zona degli zoccoli
e scaricare nuovamente attra-
verso la feritoia di aerazione
situata.
Durante il posizionamento di
-
diversi isole adiacenti o in
tandem osservare assoluta-
mente lo schema relativo alla
rispettiva installazione.
osservare
l'isola
in
di
sorgenti

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Premor 2085 g

Inhaltsverzeichnis