Before The First Use - Domo DO7294S Gebrauchsanleitung

PARTS
1. Floor nozzle
2. Telescopic tube
3. Slide button to set length of tube
4. Additional suction power control
5. Hose
6. Connection for hose
7. Handle
8. Handle lid dust bag compartment
9. Dust bag: 5 l
10. Dust bag frame
11. Full dust bag indicator
12. Accessories storage
13. Crevice vacuum cleaner & duster in one
14. Furniture nozzle
15. Parquet brush
16. Button for automatic cord rewinding
17. Button to set the suction power
18. On/off button
19. HEPA H13 filter behind grid
12

BEFORE THE FIRST USE

Always unplug the vacuum cleaner before (dis)assembling any parts.
HOSE
· Assembly: Put the connection ring at the end of the hose into the hose connection in the
vacuum cleaner and turn to the right so that it is locked into place.
· Disassembly: Unplug the vacuum cleaner. Turn the connection ring at the end of the hose
to the left and remove from the hose connection.
TELESCOPIC TUBE
1. Put the handle of the hose into the telescopic tube.
2. Set the telescopic tube to the desired length. For this, push the slide on the wand downwards and
pull on the upper part of the wand to extend it. Release the slide button and let the tube snap into
place.
3. Attach the floor nozzle to the telescopic tube by firmly sliding the tube into the nozzle.
www.domo-elektro.be
8
9
10
5
12
17
18
15
14 13
7
6
11
1
16
19
DO7294S
4
2
3
23