Marmitek CABLELINK75 Betriebsanleitung Seite 11

CableLink 75 transmitter. Please see 5.2 for more details.
7.2. Button descriptions
LED indicator light
The indicator light flashes when the remote is operating
POWER
Switches your equipment ON and OFF
TV, VCR, DVD, SAT
Used to select the device to control
SET UP
Used for programming the remote
CHAN + and CHAN -
To select channels
VOL +/-
To control the volume
M
Mute key. To switch off the sound
0-9
To select channels and numbers. Also to enter device codes.
ENTER
Works as acceptance button for menu functions of your
equipment
A-B
Toggles between TV and Video mode
MENU
Access the menu function of the device you are controlling (if
available)
EXIT
Used to exit menu functions
Cursor keys
Used to navigate and adjust Menu items of the device you are
controlling
OK
Select menu items of the device you are controlling
Fast text ON / Fast text OFF / Fast text HOLD.
INFO
Access to the on screen information of the device you are controlling
PLAY, REW, FF, STOP, PAUSE, REC
Works the same as your original remote. You must press the REC button twice to begin recording.
7.3. Setting up for TV, VCR, DVD player and Satellite receiver
1. Turn on the device you want to control (TV, VCR, etc.).
2. Press and hold SETUP until the LED indicator comes lights steadily. Release the SETUP button.
3. Press and release the mode for the device you want to control. The LED blinks once (TV, VCR,
CABLELINK 11