Side Control Module Removal; H2 Board Removal; M Board Removal; Service Connector For M Board - Sony KV-29FX64B Service Anleitung

2-8. Side Control Module Removal

Screws
Remove the two screws fixing the user control module to the
side of the set. The control module can then be removed by
sliding it towards the rear of the set allowing access to the H2
Board.

2-10. M Board Removal

To remove the M Board gently release the two clips with a
screwdriver and remove the board from its socket vertically.

2-9. H2 Board Removal

To remove the H2 Board release the two clips circled and ease
the board gently away from the support bracket.

2-11. Service Connector for M Board

From M
Board
Extender Board Assembly A-1642-293-A
If the M Board needs to be removed for testing when the
chassis is placed in its service position, it would be necessary
to use an extender board and extension cable as indicated
above.
The Extender board and extension cable are available as a
service part by ordering the part number as indicated.
- 14 -
Clips
To A
Board