RFID Handheld Reader
14.7
µSD card
To expand memory space, you find a µSD card slot inside the device. The µSD card is
accessible from the battery case.
Fig. 9: Insert the µSD card into the µSD card slot
You have to insert the µSD card into the slot with contacts bottom-up. The card will be fixed if
the card is locked noticeably.
Afterwards insert the battery and boot the device. Now the µSD card will be visible in the
Windows Explorer under the name SDMMCCard2.
14.8
RFID Reader
The RFID handheld
IQT1-HH27 -> HF RFID Reader (13,56 MHz, ISO15693)
IPT-HH27 -> LF RFID Reader (125 kHz)
The RFID reader is located at the back behind the black cover / the crosslines (see fig. 10)
To read the RFID tag, the device has to be held in center above the RFID tag.
Fig. 10: Position RFID reader
When the device is switched on, it automatically starts the P+F RFID application program.
For detailed information about that program please visit our homepage
fuchs.com
26
terminal
is available in two different designs:
HF-RFID
and find the manual for the respective device.
LF-RFID
www.pepperl-