Werbung
DECLARATION OF INCORPORATION
Declaration of incorporation
According to the Radio and Telecommunications Terminal
Equipment Act (FTEG) and the directive (R&TTE).
The company: BERNAL Torantriebe GmbH declare with sole
responsibility that the handheld transmitters listed below, pro-
duct no.: B 260.254-N, to which this declaration relates, comply
Declaration of incorporation
The manufacturer: BERNAL Torantriebe GmbH hereby declares
that swing gate operator, type: D 1000 conforms with the fol-
lowing directives:
Machinery Directive
Low-voltage directive
EMC directive
Building product directive
In particular, the following standards/draft standards have
been applied:
EN ISO 13849-1, PL "c", Cat. 2
EN 60335-1/2, if applicable
EN 61000-6-3
EN 61000-6-2
2006/42/EC
2006/95/EC
2004/108/EC
89/106/EEC
Safety of machinery –
Safety-related parts of
control systems
- Part 1: General
principles for design
safety of electrical applian-
ces / drives for gates
Electromagnetic
compatibility – emitted
interference
Electromagnetic
compatibility – immunity
to interference
with the following standards and directives or have been tested
(acc. to EC-R&TTE directive 1999/5/EC, CERTIFICATE CE 0678).
The transmitter works on the frequency 433.92 MHz and corre-
sponds to appliance class 1 (SRD).
Pfullingen, 01.03.2013
Managing Director
Note:
According to EC Directive 2006/42/EC, incomplete machines
are only intended to be incorporated in or assembled with other
machines or other incomplete machines or facilities in order to
form a single machine under the above-mentioned directive.
Putting the gate unit into operation is prohibited until it has
been established that the gate unit, into which this drive is in-
tended to be incorporated, meets the conditions of all relevant
and applicable EC directives.
Pfullingen, 01.03.2013
Company Management
GB
13
Werbung
