Internal Call - sks il vetro Video Bedienungsanleitung

+

Internal call

As an option, the unit can be configured for making
internal calls. A maximum of 2 call addresses can
be set.
Both the light key and the special key can be
configured for this function. A key that was config-
ured for an internal call can no longer by used for
switching a switch actuator.
To activate the internal call function, press the
corresponding key until you hear a confirmation
tone.
Calling up the camera image
and switching between images
Press the tone/image key to show the video cam-
era image on the display. Press the key again to
go to the image of the next camera (only if more
than one camera is connected).
+
Changing the image char-
acteristics
The brightness, colour and contrast of the images
can be changed with these image keys. Press both
keys simultaneously to switch between these
functions. Press the two keys separately to change
the set values.
Care of your phone
Only ever clean your intercom using a soft cloth
dampened with mild soap solution. Dry cleaning,
aggressive cleaning agents and abrasives can
damage the surface.
English