Special Functions; Light Manager - Sigma ROX 8.0 Handbuch

5 DescriptiOn OF FunctiOns
(functions shown during the ride)
5.7 tiMe FunctiOns

5.8 special FunctiOns

5.8.1 liGht ManaGer

n
n
56 www.sigmasport.com
The stopwatch is started and stopped with the top right-hand
button. You can use the left button to reset the stopwatch to zero.
The stopwatch runs independently from the ride time and must
therefore be manually started and stopped.
To pre-program the countdown, press on the top right-hand
button. Follow the instructions on the display to set the time. After
setting the time, start or stop the countdown by pressing the top
right-hand button. Reset the countdown to zero with the left-hand
button.
The SIGMA ROX 8.0 is equipped with a light manager.
The light can be enabled or disabled (see following illustrations for
this). When the light is enabled, the light switches on with every
press of a button and stays on for 5 seconds - provided no other
button is pressed during these 5 seconds. The display does not
change due to using the light.
To activate a function with the light switched on, another button
must be pressed within 5 seconds until you reach the required
function.
note: When the SIGMA ROX 8.0 is in sleep mode, the light
manager is automatically disabled.