Introduction Of Peaktech Dds Function Generators; Prepare To Use; Plug In And Turn On The Function Generator; Description Of Front Panel And Rear Panel - PeakTech 4055 MV Bedienungsanleitung

2. Introduction of PeakTech
With Direct Digital Synthesis Technique (DDS), PeakTech
performance indexes and numerous function characteristics which are necessary for the fast completion of
measuring. The simple and clear front panel design and the display interface of number and indicator light
are convenient for the users to operate and observe. Moreover, the extended optional functions enhance the
system characteristics.

2.1. Prepare to use

2.1.1. To check the instrument and the accessories
Check whether the instrument and the accessories are complete and unbroken. If the package is badly
damaged, please keep it until the instrument passes the performance testing.

2.1.2. Plug in and turn on the function generator

To guarantee the safe operation of the instrument, the following conditions should be achieved.
Voltage:
Frequency:
Power:
Plug the power connector into power socket outlet (AC 100 ~ 240 V) on the rear panel with safe earth-wire.
Press the power switch on the front panel to switch on the power. Now the initialization of the generator
begins, and then the default parameters are installed. The instrument will enter into the working state of
single frequency of channel A and output sine waveform and display the frequency value and amplitude
value of signal of channel A.
WARNING!
In order to ensure the security of the operator, triple- core socket outlet with safe earth-wire must be used.

2.2. Description of Front Panel and Rear Panel

2.2.1. Front Panel:
1. Power switch
2. Function keys
3. Waveform output
4. Sync output

DDS Function Generators
AC 100-240V
45 - 65 Hz
< 20VA
7.
1.
2.

DDS function generators are of the high
Temperature:
Humidity:
6.
3.
5. Adjusting knob
6. Numeric keys
7. Display screen
-30-
0 ~ 40°C
< 80%
5.
4.