Fritz! PowerLine 546E Handbuch Seite 7

Extending a Wireless LAN Network
Here is how to use FRITZ!Powerline 546E as a WLAN repeater.
1. Start a web browser and enter
FRITZ!Powerline 546E user interface opens.
2. Open System / Operating Mode and click Change Operating Mode.
3. Select WLAN Bridge and click Next. A Wizard starts to guide you through the
confi guration process.
4. Click Finish.
5. If FRITZ!Powerline 546E is connected with your router via a powerline or LAN
connection, clear this connection.
FRITZ!Powerline 540E may be connected with your router
or wirelessly.
6. Connect your wireless LAN and network devices with FRITZ!Powerline 546E.
WLAN
12
fritz.powerline in the address line. The
either with a
WLAN
ower ecurity
Status Display and Operation
On/Off
LAN cable
Display/Operation Condition
on socket is switched on
off socket is switched off
press briefl y switching the socket on and off
on wireless LAN function is enabled
fl ashes WPS quick connection in progress
fl ashing rapidly searching for the base station in the wireless bridge
operating mode
off wireless LAN function is switched off
press briefl y Starting a WPS quick connection
reset for factory settings, press and hold at the same time as
on is connected with the powerline network and ready for
data exchange
fl ashes resetting or confi guring security settings
off is off , or did not detect any compatible powerline
devices, or did not detect any devices that use the
same network key
press briefl y integrating FRITZ!Powerline 546E safely into an existing
powerline network
13