Hitachi CP-X10000 Bedienungsanleitung Seite 142

Connection to the ports Connection to the ports
A COMPUTER IN1,
D-sub 15pin mini shrink jack
• Video signal: RGB separate, Analog, 0.7Vp-p,
75 terminated (positive)
• H/V. sync. signal: TTL level (positive/negative)
• Composite sync. signal: TTL level
Pin
1
Video Red
2 Video Green
3 Video Blue
4
(No connection)
5 Ground
6 Ground Red
7
Ground Green
8 Ground Blue
D
BNC (G/Y, B/Cb/Pb, R/Cr/Pr, H, V)
• BNC jack x 5
• Video : Analog 0.7Vp-p, 75 terminator
• H/V, sync, : TTL level (positive/negative)
• Composite sync, : TTL level
COMPONENT VIDEO
RCA jack x3
• System: 480i@60, 480p@60, 576i@50, 576p@50, 720p@50/60, 1080i@50/60,
1080p@50/60
Port
Y Component video Y, 1.0±0.1Vp-p, 75 terminator with composite sync
Cb/Pb Component video Cb/Pb, 0.7±0.1Vp-p, 75 terminator
Cr/Pr Component video Cr/Pr, 0.7±0.1Vp-p, 75 terminator
I O
AC IN
COMPUTER IN2,
B
At RGB signal
Signal
E Y, Cb/Pb,
F
C
A
LAN
MONITOR
HDMI DVI-D D
OUT
CONTROL IN CONTROL OUT REMOTE
S-VIDEO
CONTROL
IN
COMPUTER IN1 COMPUTER IN2
OUT
VIDEO 1 BNC
R/Cr/Pr G/Y B/Cb/Pb H V VIDEO 2
Y
Cb/Pb
Cr/Pr
F
G
MONITOR OUT
C
Pin
9 (No connection)
10 Ground
11 (No connection)
A , B : SDA (DDC data), C : (No connection)
12
13 H. sync / Composite sync.
14 V. sync.
A , B : SCL (DDC clock), C : (No connection)
15
Cr/Pr
G
Signal
Connection to the ports
B
E
11 12 13 14 15
6 7 8 9 10
1 2 3 4 5
Signal
3